1 bumped gaas spdt switch dc - 8.0 ghz rev. v1 MASW-009590-000DIE ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? 802.11a + b/g and mimo applications ? test and measurement and low/medium power telecommunication applications up to 8.0 ghz ? broadband performance: dc - 8.0 ghz ? low insertion loss: 0.5 db from 2.0 - 6.0 ghz ? ultra-small form factor: 0.605 x 0.485 mm ? fast settling for low gate lag requirements ? rohs* compliant description the MASW-009590-000DIE is a broadband bumped gaas phemt mmic spdt switch. typical applications are for wlan ieee 802.11a + b/g, and mimo. this switch is designed specifically for dual band wireless lan modules where size constraints are critical. designed for lo w insertion loss, this spdt switch maintains low loss up to 8.0 ghz. the MASW-009590-000DIE is fabricated using m/a-com technology solutions? proprietary gaas phemt process, designed for ultra-fast high linearity switching applications. the process features full passivation for performance and reliability. * restrictions on hazardous substances , european union directive 2002/95/ec. ordering information part number package MASW-009590-000DIE 1 separated die on grip ring masw-009590-000d3k 2 die in 3000 piece reel 1. die quantity varies. 2. reference application note m513 for reel size information. die bump pad layout (bump side up) die bump pad configuration absolute maximum ratings 3,4 3. exceeding any one or combination of these limits may cause permanent damage to this device. 4. m/a-com technology solutions does not recommend sustained operation near these survivability limits. parameter absolute maximum input power @ 3 v control +32 dbm input power @ 5 v control +33 dbm operating voltage +8.5 volts operating temperature -40 c to +85 c storage temperature -65c to +150 c name description v c 1 voltage control 1 rfc rf common v c 2 voltage control 2 rf2 rf output 2 gnd ground rf1 rf output 1
2 bumped gaas spdt switch dc - 8.0 ghz rev. v1 MASW-009590-000DIE ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications: t a = 25c, z 0 = 50 ? , v c = 0 v / 3 v, 22 pf capacitor 5,6 5. for positive voltage control, external dc bl ocking capacitors are required on all rf ports. 6. electrical minimum and maximum specificati ons are guaranteed in final package assembly only. 7. insertion loss can be optimized by varying the dc blocking capacitor value. parameter test conditions units min. typ. max. insertion loss 7 2.0 - 6.0 ghz 6.0 - 8.0 ghz db ? ? 0.50 0.55 0.80 ? isolation 2.4 ghz 5.3 ghz 5.8 ghz 6.0 - 8.0 ghz db 26.5 21 20 ? 27.5 22 21 18 ? ? ? ? return loss dc - 8.0 ghz db ? 18 ? input ip2 two tone, +15 dbm / tone, 10 mhz spacing 6.0 ghz dbm ? 85 ? input ip3 two tone, +15 dbm / tone, 10 mhz spacing 6.0 ghz dbm ? 52 ? input p0.1db 2.4 - 5.8 ghz dbm ? 26 ? input p1db 2.4 - 5.8 ghz dbm ? 30 ? t-rise, t-fall 10% to 90% rf and 90% to 10% rf ns ? 13 ? ton, toff 50% control to 90% rf and 50% control to 10% rf ns ? 18 ? transients mv ? 24 ? gate lag 10% rf to 97.5% rf ns ? 27 ? control current |v c | = 3 v a ? 1 5 truth table 8 control v c 1 control v c 2 rfc? rf1 rfc?rf2 1 0 on off 0 1 off on 8. 1 = +1.8 v (for (vhi-vlo) < 1.8v, add a 20k ? pull up resistor from rfc to vhi) to +5 v, 0 = 0 v + 0.2 v.
3 bumped gaas spdt switch dc - 8.0 ghz rev. v1 MASW-009590-000DIE ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. typical performance curves (plots = chip on board assembly) insertion loss input return loss isolation handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be dam- aged by static electricity. proper esd control techniques should be used when handling these devices. application schematic c1, c2, c3 = 22pf r1, r2 = 500 ? 9 9. resistors r1 and r2 are optional, acting to improve 8 ghz insertion loss. -30 -25 -20 -15 -10 -5 0 12345678 frequency (ghz) -35 -30 -25 -20 -15 12345678 frequency (ghz) -1.0 -0.8 -0.6 -0.4 -0.2 0.0 12345678 frequency (ghz)
4 bumped gaas spdt switch dc - 8.0 ghz rev. v1 MASW-009590-000DIE ? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. die dimensions (top and side views) die bump pad layout - bottom view (bump side down - as installed on board) die bump pad layout - top view (bump side up) 10. orientation mark is only on ma terial that is shipped in tape and reel. the mark is not available on die shipped on grip ring. pcb top metal / solder mask 10
|
